1.
CONTACT US
Call our team to discuss your project requirements. Alternatively, leave a message and we will respond promptly to arrange a consultation.
In commercial and industrial environments, Metal Doors serve as a critical component of the building envelope. Rather than acting as simple access points, these systems function as engineered barriers designed to protect assets, occupants, and infrastructure. At glassprojectsolutions.ca, we specialise in supplying and installing hollow metal and solid steel door systems built for demanding commercial applications.
For contractors and security-focused buyers, steel doors offer clear technical advantages. Because of their high yield strength, metal doors resist impact, forced entry, and long-term wear far better than alternative materials. In addition, properly specified assemblies contribute to fire separation, acoustic control, and overall building performance. As a result, a single door system delivers multiple layers of protection.
In Canadian conditions, thermal performance also matters. Therefore, our Metal Doors are selected and installed to limit heat loss during extreme temperature changes. Moreover, all systems comply with the National Building Code of Canada and CSDMA standards. Each assembly is listed and labeled, with verified fire ratings of up to three hours and tested positive-pressure resistance. Consequently, contractors receive door solutions that meet inspection requirements while enhancing long-term security.
Have questions or wanna see the difference for yourself? Visit here to get in touch today for a free consultation, call us , or request a personalized estimate and enhance your building’s security with our products and services.
Metal Doors designed for commercial use provide dependable security in high-traffic environments. Therefore, our commercial metal doors are engineered with reinforced frames and durable steel construction to withstand daily use and external exposure. In addition, these systems integrate cleanly with industrial, retail, and institutional buildings. As a result, businesses receive a long-lasting entry solution that supports safety while maintaining a professional appearance.
Metal office doors balance security with a refined workplace aesthetic. Because these doors offer enhanced fire resistance and sound control, they perform well in busy corporate settings. Moreover, a range of finish options allows visual consistency with modern interiors. Consequently, offices benefit from doors that deliver reliability, compliance, and low maintenance over time.
Storefront Metal Doors must perform under constant use while protecting valuable inventory. For this reason, our storefront systems feature heavy-duty steel construction and advanced locking mechanisms. Additionally, corrosion-resistant frames help preserve appearance in exposed conditions. As a result, businesses maintain secure and welcoming entrances throughout the year.
Metal-framed window and door systems add strength while supporting contemporary architectural design. Because steel and aluminum frames allow slimmer profiles, larger glass areas can be incorporated without sacrificing structural integrity. In addition, thermally broken options improve energy performance. Therefore, commercial buildings achieve modern aesthetics alongside long-term durability.
At Glass Project Solutions Ltd., precision defines how Metal Doors perform in real-world conditions. Therefore, we use digital measurement and alignment tools to install frames square and level within tight tolerances. As a result, doors operate smoothly without binding, and locking hardware aligns correctly every time. Moreover, this accuracy extends the lifespan of hinges, closers, and electronic strikes, which directly improves long-term security.
Commercial metal door installation requires coordination, documentation, and timing. For this reason, we work closely with general contractors, site supervisors, and security integrators throughout the project. In addition, we understand door schedules, hardware submittals, and inspection requirements. Consequently, fire-rated and NAFS-compliant installations proceed efficiently and pass final inspections without delays.
Code compliance is never optional. Accordingly, we follow National Building Code requirements for egress widths, door swing, closing speeds, and latching forces. Furthermore, when accessibility standards apply, threshold heights and opening pressures are verified carefully. Because we work to CSDMA manufacturing standards, each metal door system is engineered for its specific application and occupancy type.
Every commercial project presents unique conditions. Therefore, we offer customized Metal Doors to suit non-standard openings, specialized finishes, and advanced security needs. In addition, we integrate modern access control systems, including biometric and RFID technologies. As a result, smart frames with concealed raceways allow clean installation of electrified hardware without exposed wiring or compromised door integrity.
| Maintenance Task | Frequency & Procedure |
|---|---|
| Hardware Lubrication | At least once per year, apply a silicone-based lubricant to hinges, latches, and door closers. In addition, avoid grease-based products, as they attract dust and grit. As a result, moving components operate smoothly and experience less wear. |
| Clearance Check | Twice per year, verify that clearances between the door and frame remain within 1/8 inch (3 mm). Because excessive gaps can compromise fire ratings and security, early detection is critical. Consequently, compliance and performance remain intact. |
| Seal & Gasket Inspection | Every quarter, inspect weather-stripping and smoke seals for cracking or brittleness. Moreover, intact gaskets support energy efficiency and smoke control in rated openings. As a result, the door system continues to meet code requirements. |
| Finish Touch-ups | Address scratches or dents immediately using a rust-inhibitive primer and matching finish. Since exposed steel can oxidize quickly, timely repairs prevent corrosion. Therefore, structural integrity and appearance are preserved. |
| Alignment & Closing | Each month, test the self-closing function to confirm the door latches fully from a 75 mm open position. Because proper closing is mandatory for code compliance, regular checks reduce inspection risks. Consequently, doors remain reliable and compliant. |
The performance of Metal Doors depends on the interaction between steel face sheets and the internal core. When impact occurs, internal reinforcements—such as steel stiffeners or honeycomb cores—spread kinetic energy across the entire door surface. As a result, force does not concentrate at a single point. Consequently, a properly engineered 16-gauge metal door can outperform significantly thicker single-layer materials. At glassprojectsolutions.ca, core selection is matched precisely to the load-path and security requirements of each facility.
Exterior metal doors in Canada face extreme temperature differences between interior and exterior environments. Therefore, unmanaged thermal stress can lead to bowing or seal failure. To prevent this, our Metal Doors incorporate thermal breaks that separate inner and outer steel skins. In addition, EPDM or silicone gaskets allow controlled expansion and contraction. As a result, doors maintain proper alignment, sealing, and smooth operation even during severe winter conditions.
A metal door system is only as strong as its connection to the building structure. For this reason, we specify anchoring methods based on wall construction, including masonry, steel stud, or wood framing. Moreover, in high-security applications, we install grouted frames that fill the cavity between the frame and wall with mortar. Consequently, the assembly becomes a rigid, monolithic barrier capable of resisting impact, forced entry, and long-term movement.
Once your Metal Door order is confirmed, our installation team coordinates promptly to ensure a smooth, efficient workflow. From consultation to final cleanup, every step follows a proven process designed to meet commercial schedules, safety requirements, and code compliance.
Call our team to discuss your project requirements. Alternatively, leave a message and we will respond promptly to arrange a consultation.
After reviewing door specifications, security needs, and site conditions, we provide a clear, customized quotation tailored to your project scope.
Next, we coordinate with your team to select an installation date that aligns with construction timelines or operational needs. Because schedules vary, we remain flexible and responsive.
Before installation begins, our professionals verify opening dimensions, wall conditions, and hardware requirements. As a result, all surfaces are properly prepared and levelled for precise door placement.
On the scheduled date, our certified installers arrive fully equipped to complete the work efficiently. Throughout the process, we ensure proper alignment, secure anchoring, and full compliance with fire and safety codes.
After installation, we remove all debris and perform a final inspection. Consequently, your metal doors are fully operational, code-compliant, and ready for immediate use—without disruption to your site.
At Glass Project Solutions Ltd., we are committed to providing Metal Door Services that not only enhance the aesthetic appeal of your place but also comply with the highest safety and regulatory standards. Our team ensures that every product we install meets or exceeds the relevant Canadian building codes, including the National Building Code of Canada (NBCC) and CAN/CSA A440.4 installation guidelines for glazing. We strictly follow these standards to ensure that our installations are safe, secure, and energy-efficient. For example, all glass used in our products is made from toughened safety glass, which is heat-treated to improve strength and durability. This glass meets the safety requirements outlined in the CSA Z97.1 standard, ensuring that it shatters into small, rounded pieces if broken, reducing the risk of injury.
Furthermore, our installation practices comply with water-tightness and air-tightness standards to prevent leaks, condensation, and water infiltration. We carefully follow the NAFS (North American Fenestration Standard) to ensure the proper sealing of all joints and frames, which helps prevent water damage and supports long-term performance. With our commitment to quality, we integrate all these technical standards into each installation, providing peace of mind that your place will not only look great but also perform reliably and safely for years to come.
If you’re ready to enhance your building with high-performance metal Doors, Glass Project Solutions Ltd. offers free consultations and personalized estimates to ensure you get the best solution for your project. Have questions or wanna see the difference for yourself? Visit here to get in touch today for a free consultation, call us at or request a personalized estimate here and enhance your home’s style with our products and services while delivering lasting performance.