1.
CONTACT US
Call us today! Our team is always ready to give you a consultation to answer all your questions, or leave us a message, and we will get back to you as soon as possible.
In the modern skyline, high-rise glass and glazing systems define the architectural identity of cities. They are not just about beauty — they’re about precision engineering, safety, and sustainability. At Glass Project Solutions Ltd., we specialise in providing state-of-the-art glass and glazing services for high-rise residential, commercial, and mixed-use buildings across Canada. Our projects meet the most rigorous design, energy, and structural standards while enhancing visual appeal and comfort.
High-rise glazing involves much more than installing panels of glass. It’s a fusion of structural design, thermal performance, acoustics, and aesthetic excellence. We engineer each system — from curtain walls and unitised glazing to spandrel panels and high-performance laminated glass — to withstand wind loads, temperature variations, seismic activity, and environmental wear, ensuring full compliance with Canadian Building Codes (NBC and CSA A440 standards).
Have questions or wanna see the difference for yourself? Visit here to get in touch today for a free consultation, call us, or request a personalised estimate and enhance your home’s style with our products and services while delivering lasting performance.
Curtain walls are non-load-bearing glass walls that envelop the whole exterior of a high-rise building. We design these systems using aluminium framing and high-strength tempered or laminated glass to deliver better wind and water tightness and higher energy performance than other products on the market, while allowing maximum daylight to enter.
We pre-assemble unitised systems in our factory and then mount them on-site in large modular panels, reducing installation time and increasing overall precision. The best to use in high buildings, they guarantee superior air tightness, weathering and consistency between the levels.
This superior technology employs silicone seals rather than exposed framing to fix the glass to create a smooth, frameless appearance. It provides the architects with the freedom of limitless design with an extraordinary strength and thermal insulation.
Point-supported systems are a contemporary expression of architecture, and they involve frames made of stainless steel fittings to fasten glass panels without being seen. They provide a clear, open aesthetic that is ideal in a lobby, atrium, and storefront.
At Glass Project Solutions, precision drives every installation. We supply high-quality, durable glass products and install them with meticulous attention to design, aesthetics, and safety. Our expert craftsmanship ensures efficient layouts that enhance functionality. Serving both residential and commercial clients, we consistently deliver exceptional results, combining durability, style, and precision to create glass installations that stand the test of time.
Glass products are not easy to install, hence only those hands that are professional should work on them. Our field of expertise is professional installation. In Glass Project Solutions you can be certain that there is an inspection of the area in terms of safety and compatibility before the appliance is positioned. We do not cut corners since we ascribe to the standards of installing appliances in order to make sure that all safety standards are adhered to.
In Glass project solutions, we aim at knowing the unique needs of each client to have perfect glass installations. Our well trained personnel measure, assess and evaluate every space keenly taking into consideration any details. We can do this through close listening and customizing the solutions to suit your needs, thus providing you with the true results, which are efficient, safe, and attractive to the eye, giving you installations that are beyond expectations each time.
We at Glass Project Solutions Ltd. want all our clients to be delighted with the installation of their High Rise Glass & Glazing . That is why we handle every project with the utmost professionalism, which will satisfy even the most demanding customers. Plus, to achieve our goal, we are continually investing in research and development of different technological solutions. We use cutting-edge technology and produce quality products for your home.
| Parameter | Importance/Focus |
|---|---|
| Routine Inspections | Conduct visual examination of cracks, sealants, decay, or frame corrosion every three months. |
| Cleaning | Do not apply scratching solutions and soft brushes to prevent surface scratches. Cleanse at least twice annually, but more often in harbours or polluted areas. |
| Sealant Replacement | To retain the waterproof integrity, reposition silicone seals every 10-15 years. |
| Frame Care | Find out whether there is an occurrence of aluminium oxidation or loosening of the joints; apply the protective coatings on the joints wherever needed. |
| Drainage Maintenance | Ensure that the weep holes are not clogged in order to be able to remove the moisture. |
Our engineers measure wind load, seismic, and live loads based on the NBC and CSA S136 standards. The aluminium frames are normally thermally isolated and anchored with high-grade stainless steel. The panels of the glass (which are frequently tempered or laminated) are designed to take stress without deforming.
To reduce thermal bridging, we use low-E coated IGUs (Insulated Glass Units) stuffed with inert gases such as argon or krypton. This makes sure that the interior environments are efficient in terms of energy and are quiet. Our glazing systems can attain U-values as low as 1.0 W/m 2 K, surpassing and superseding Canadian energy standards.
Safety is paramount. Our laminated safety glass, which is not broken under impact, and fire-resistant glazing systems are in line with the CAN/ULC S101 standards. In the case of hurricane or impact zones, we use special interlayers such as SGP (SentryGlas Plus) to provide additional strength.
We work hand in hand with designers to meet design intent – we provide curved glass and tinted finishes, frits of ceramic, and built-in shading. The fact that our modelling is BIM compatible guarantees that it is fully integrated with building envelopes and mechanical systems.
The contemporary glazing, low-E coating and argon-filled units reduce the amount of heat that gains in summer and heat loss in winter. This minimises HVAC loads and operation, enhancing the energy profile of the building.
Large glass windows are used to make the most out of natural light, minimising the need for artificial light by as much as 60 per cent. This not only conserves energy but also improves occupant well-being and occupancy productivity.
Our tempered and laminated glass panels are highly impact-resistant and can endure the wind speed of over 250 km/h as well as seismic movement, which makes them safe in high-rise buildings.
The double and triple glazes have better sound-insulating properties with 35-45 dB, which is ideal in urban high-rise buildings.
The aluminium-framed glazing systems are weatherproof and corrosion-free. Together with the appropriate coating and seal, they need minimal maintenance, and they would be able to remain clear over an extended period.
Our glazing solutions create a high modernity in the building structure and also comply with the vision of the architect, as it is made of reflective glass, up to tinted glass, and clear glass up to fritted designs.
Once your order is placed, our installation team will reach out to your place as soon as possible. They will complete the installation following our step-by-step process to ensure all the procedures go smoothly and work like a charm.
Call us today! Our team is always ready to give you a consultation to answer all your questions, or leave us a message, and we will get back to you as soon as possible.
After a meticulous discussion, we will send you a customized quotation based on your needs.
We will collaborate and choose the most appropriate time for you. Our clients are our priority, and we know everyone has different schedules so that we will adjust accordingly.
Our installation professionals will visit your house to ensure everything is ready for the service. We’ll also verify that every surface is prepped and leveled for installation.
The team will arrive at the place on the date you fixed to start work. We’ll take care of the installation as quickly as possible so that they will be entirely usable as soon as possible.
After finishing the installation, the team will tidy up everything so that you will not have to deal with any cleanup.
At Glass Project Solutions Ltd., we are committed to providing high-rise glass & Glazing product that not only enhances the aesthetic appeal of your place but also complies with the highest safety and regulatory standards. Our team ensures that every product we install meets or exceeds the relevant Canadian building codes, including the National Building Code of Canada (NBCC) and CAN/CSA A440.4 installation guidelines for glazing. We strictly follow these standards to ensure that our installations are safe, secure, and energy-efficient. For example, all glass used in our products is made from toughened safety glass, which is heat-treated to improve strength and durability. This glass meets the safety requirements outlined in the CSA Z97.1 standard, ensuring that it shatters into small, rounded pieces if broken, reducing the risk of injury.
Furthermore, our installation practices comply with water-tightness and air-tightness standards to prevent leaks, condensation, and water infiltration. We carefully follow the NAFS (North American Fenestration Standard) to ensure the proper sealing of all joints and frames, which helps prevent water damage and supports long-term performance. With our commitment to quality, we integrate all these technical standards into each installation, providing peace of mind that your place will not only look great but also perform reliably and safely for years to come.
Whether you’re an architect designing a breathtaking skyline addition or a builder working on a multi-story residential tower, Glass Project Solutions Ltd. is your trusted partner for high-rise glass and glazing excellence. Our team will assess your building’s specifications, environmental factors, and aesthetic goals to craft a custom solution that performs flawlessly for decades. We provide on-site assessments, CAD-based mockups, and transparent pricing tailored to your project’s scope. Have questions or wanna see the difference for yourself? Visit here to get in touch today for a free consultation, call us, or request a personalised estimate and enhance your home’s style with our products and services while delivering lasting performance.